Aller au contenu

Panasonic introduit sa prochaine génération d'afficheurs Plasma


Thierry P.
 Partager

Messages recommandés

PANASONIC INTRODUCES NEXT-GENERATION PLASMA DISPLAYS AT 2008 INTERNATIONAL CES

Revolutionary Plasma Technologies Boast Dramatic Energy Efficiency, Less Than One-inch Super-thin Profile and 150-inch Ultra-large Screen

Las Vegas, NV (January 7, 2008) – Panasonic, the leading brand by which Matsushita Electric Industrial Co., Ltd. is known, today announced that the company has developed three prototype plasma display panels (PDPs) using ground-breaking technologies. The prototypes include a 42-inch panel with double efficiency technology that halves energy consumption while maintaining the same brightness*, a less than one-inch super-thin 50-inch PDP and the world’s largest 150-inch advanced high definition (HD) PDP. The three prototypes are on display at the 2008 International Consumer Electronics Show (CES) that starts on January 7 in Las Vegas.

At the core of these cutting edge PDP's lies the double efficiency technology used in the 42-inch prototype. After thoroughly reviewing its existing IC technology and panel structures, Panasonic developed new phosphors and cell design technology for improved discharge and new circuit and drive technology to significantly reduce power loss. As a result, the 42-inch prototype has twice the luminance efficiency and provides the same brightness as the existing 42-inch 1080p full HD PDP, while cutting the power consumption by half.

The double-efficiency technology forms the base for next-generation PDPs, enabling even thinner profiles, larger screens, brighter images, higher definition and lower power consumption. The revolutionary technology promises to open up new possibilities for PDPs. Higher density HD PDP’s that can be used as master monitors for movie studios will become possible through this innovative technology.

The 24.7mm** (less than one inch) super-thin 50-inch Plasma TV, for example, is about one-fourth as thin as previous plasma TVs* thanks to the new circuit and drive technology. It weighs only 22 kg, about half the weight of previous models*. This thinner profile and lighter weight give users more setup flexibility in the living room, while also making the unit an elegant addition to the room décor.

Furthermore, using the wireless transmission system that Panasonic developed recently based on “Wireless HD” standard, it will allow users to enjoy HD contents on the TV with more flexible layout and no wire installation. It can be hung on the wall or suspended from the ceiling according to user’s viewing preference.

As a leader in large-screen PDPs, Panasonic took a huge leap in making them even larger. The 150-inch PDP delivers dynamic, overwhelming image quality with an 8.84 million pixel resolution (2,160 x 4,096) ―more than four times the 1080p HD specification (1,080 x 1,920). The prototype has a screen size equivalent to nine 50-inch PDPs with an effective viewing area of 11 ft (3.31 m) (W) x 6 1/4 ft (1.87 m) (H). With the enhanced PDP technologies Panasonic accumulated in the development of its 103-inch PDP, the 150-inch PDP provides stable and uniform images across the vast expanse of the screen and the same brightness as the 103-inch PDP. Featuring true-to-life color reproduction capability and quick response to moving images, the ultra-large PDP renders clear, crisp, spectacular images unrivaled by any other.

As the 103-inch PDP has been welcomed by industry for use in commercial and public facilities and consumers for family entertainment, the 150-inch plasma is expected to generate new demand from various fields.

These innovations may prove to be only the tip of the iceberg of Plasma’s potential. PDP is a relatively young technology as it has only been about ten years since the Plasma TV appeared on the market. In tandem with the market’s growth, the Plasma TV has steadily improved in quality, gained popularity and become a leader in the global market for high-quality, large-screen TVs. Over the course of their development PDPs have established their reputation as displays that excel in high-contrast, color reproduction, moving picture resolution2) and wide viewing angles. However room for improvement remains as the PDP’s full potential is still yet to be realized.

In the future, high definition will become the norm in broadcasting and video recording such as Blu-ray Disc recorder/players. There will be progress in wireless and other peripheral technologies and more convergence is expected to take place between TV and communications technologies. Along with these developments, demand for larger and higher-definition flat-panel TVs will be accelerated. At the same time, industrial applications of PDPs will be expanded further in such areas as the medical, educational and public fields.

Panasonic continues to explore new technologies to open up a new area for Plasma TVs as the company responds to customer demands across the world. While seeking to raise the quality bar in products, the company continues to pursue greener products. When it comes to TVs, Panasonic has become the first company to completely eliminate lead from PDPs. Its Plasma TVs have a long life of 100,000 hours and natural materials are used in the speakers such as bamboo fiber diaphragms.

* This refers to previously manufactured Panasonic panels.

** The thickness from the glass surface is only 23.7mm thin.

Lien vers le commentaire
Partager sur d’autres sites

Créer un compte ou se connecter pour commenter

Vous devez être membre afin de pouvoir déposer un commentaire

Créer un compte

Créez un compte sur notre communauté. C’est facile !

Créer un nouveau compte

Se connecter

Vous avez déjà un compte ? Connectez-vous ici.

Connectez-vous maintenant
 Partager

  • DISCUSSIONS RÉCENTES

    • Voici ce qu'explique Perplexity :   Oui. DaVinci Resolve peut transformer une série de photos RAW d’iPhone en vidéo, notamment les fichiers Apple ProRAW au format DNG. Apple précise que le ProRAW utilise le format DNG, compatible avec les logiciels qui prennent en charge ce format.[apple] Méthode recommandée 1.    Copiez toutes les photos dans un seul dossier sur votre Mac. 2.    Renommez-les dans l’ordre, par exemple :    iPhone_0001.dng ,  iPhone_0002.dng ,  iPhone_0003.dng . 3.    Ouvrez DaVinci Resolve. 4.    Allez dans la page Media. 5.    Importez le dossier ou les photos. 6.    Si Resolve les regroupe en une seule séquence, faites un clic droit dessus et choisissez Create New Timeline Using Selected Clips ou faites-la glisser sur la timeline. 7.    Dans Project Settings, choisissez la fréquence d’images : •    24 images/s : rendu cinéma ; •    25 images/s : standard vidéo en France ; •    30 images/s : mouvement un peu plus fluide. Par exemple, 250 photos à 25 images/s donneront une vidéo de 10 secondes. Si les photos ne sont pas reconnues comme séquence Dans la page Media, ouvrez le menu d’affichage et sélectionnez Show Individual Frames. Vous pourrez alors importer les photos séparément, les sélectionner et les déposer sur la timeline.[motionarray] Vous pouvez aussi régler la durée par défaut des images dans : DaVinci Resolve > Preferences > User > Editing > Standard Still Duration Réglez-la sur 1 frame pour créer un véritable accéléré de type time-lapse.[youtube]
    • Chez moi, il y a bien les 4 images :     On peut apercevoir l'icône de photos sur chacune d'elles.   Ceci si je fais un glisser/déposer dans le chutier.   Mais si je les importe, effectivement elles ne forment qu'une vidéo :     Peut-être que DVR n'importe pas les RAW en DNG issus de l'iPhone ?
    • Salut à tous, Je vous fais un retour rapide parce que ça m'est arrivé il y a environ trois semaines et ça peut servir à d'autres qui bossent en mission... Reportage corporate à Andorre-la-Vieille, à peine deux heures de route de Perpignan mais un client basé à Toulouse qui voulait un premier montage dès le soir du dernier jour de tournage. Trois jours de tournage, des rushes en 4K à uploader chaque soir, plusieurs Go à chaque fois. Sauf que le wifi de l'hôtel tenait pas la la charge, ça coupait toutes les cinq minutes, impossible de finir un transfert correctement. Du coup j'ai basculé sur du data mobile pour tenir le délai. Sauf que passer par l'itinérance de mon opérateur habituel, sur trois jours avec le volume que j'envoyais, ça m'aurait couté un bras. Alors j'ai fini par éplucher un répertoire de codes promo esim pour prendre un forfait data local sans passer par l'itinérance de mon opérateur habituel, histoire de pas exploser la facture pour une mission somme toute assez courte. Concrètement ça m'a permis d'avoir une connexion plus stable que le wifi de l'hôtel, et surtout un forfait activé en quelques minutes sans avoir à chercher une boutique sur place ni changer de carte physique. Les uploads sont passés sans souci les trois soirs, montage livré dans les temps. Apres, ça dépend des missions et du pays, mais pour un tournage de quelques jours à l'étranger je pense que je referai comme ça la prochaine fois. Voilà pour mon retour d'exp, dites-moi ce que vous en pensez. Voilà quoi.
    • Bonjour, Je vais essayer de mieux m'expliquer. Sur mon disque dur, dans le même répertoire, j'ai 4 photos RAW (différentes statues prises dans un même musée) prises avec un iPhone 15 Pro Max (exportées depuis l'application Photo de l'Iphone dans leur format original - cad sans retouche). Rien de particulier à ce stade : elles sont parfaitement lisibles par Aperçu ou autres. J'ai donc 4 fichiers parfaitement lisibles : IMG_2001.DNG, IMG_2002.DNG, IMG_2003.DNG, IMG_2004.DNG,    Dans DaVinci Resolve 21 (version gratuite), je vais dans le Media Pool, et j'affiche le contenu de mon répertoire pour importer mes photos. Et là, DVR m'affiche non pas 4 images, mais 1 image nommée IMG_[2001_20014].DNG C'est une sorte de séquence vidéo de 4 dixième de seconde qui contient les 4 images, et dont je ne peux rien faire.   Ce phénomène se répète pour tous les ensembles d'images un peu "semblables"   Voilà, j'espère que j'ai été plus claire.   Merci pour ton aide
    • Bonjour, auteur-compositeur-interprète  AMATEUR installé à Belz 56550 (Morbihan), je recherche un vidéaste amateur intéressé par un travail autour de chansons. J'ai fait moi-même quelques vidéos pour pouvoir exposer mes chansons sur Youtube, mais ça n'est définitivement pas mon truc et je me sens freiné dans le coeur de mon travail. Si intéressés, vous pouvez voir et entendre mon travail sur ma chaine youtube GILLES ROMEY
    • Bonjour,   Étant comme toi sur Mac, j'ai téléchargé tes photos prises par un iPhone. Mais j'ai du mal à interpréter le sens de ton observation. Peut-être pourrais-tu essayer de reformuler ?   Je les ai posées sur la timeline de FCP X et n’ai rien remarqué de particulier.   J'ai essayé aussi dans DVR, mais je ne suis pas parvenu à observer quoi que ce soit, sans doute en raison de ma méconnaissance de cette application.      
×
×
  • Créer...

Information importante

j'accepte les cookies de ce site. Conditions d’utilisation